Nedap i45
Nedap · RF / Hybrid RF+RFID / RFID-only · upgradable next-gen gate
Nedap's i45 is the migration gate — the same hardware ships as RF-only, as a Hybrid RF+RFID system, or as RFID-only (iD Gate), with an in-field upgrade path between configurations. Start with 8.2 MHz RF coverage today and move to RFID-driven detection (Impinj R2000 chip, iD Cloud Loss Prevention integration) as the source-tagging programme matures. Modern open design with adaptable frame colors and cover sets, on the same i-Line electronics and single-cable architecture as the i30 and i37.
- Technology
- RF / Hybrid / RFID
- Height
- 1668 mm (5.47 ft)
- Weight
- 9.5 kg (20.94 lbs)
- Upgrade path
- In-field RF to RFID
Nedap sells exclusively through certified Loss Prevention Partners. For RFID hardware available in the U.S. through RSG, see our Century RFID range at rfidinventorytags.com.
Overview
One gate, three configurations, full migration path.
Retailers moving from RF labels to RFID source tagging usually face a forklift problem at the gate — RF pedestals do not read RFID, and rip-and-replace is expensive. The i45 is built specifically to be that bridge. Buy it as RF-only today and protect existing 8.2 MHz inventory; upgrade in-field to the Hybrid configuration to cover both RF labels and RFID source-tagged items in parallel; upgrade again to RFID-only (sold as iD Gate) once the RF programme is fully sunset. The RFID variants use the Impinj R2000 chip and integrate with iD Cloud Loss Prevention for item-level EPC analytics. The frame and cover sets are configurable, so the gate adapts to the store concept regardless of which technology mode it runs.
Features
- Three configurations on the same chassis — RF only, Hybrid RF+RFID, RFID only
- In-field upgrade path — RF to Hybrid to RFID without replacing the gate
- Impinj R2000 on RFID variants — RAIN UHF, broad chip ecosystem
- Modern open design — adaptable to store concept
- Configurable frame colors and cover sets
- Single-cable installation — common i-Line architecture
- i-Line state-of-the-art electronics — same platform as i30 and i37
- iD Cloud Loss Prevention integration — once RFID is enabled
- Real-time dashboards — in-store and organization-wide
Specs
Technical snapshot
| Technology | RF 8.2 MHz / Hybrid RF+RFID / RFID UHF (Impinj R2000) |
|---|---|
| Weight | 9.5 kg (20.94 lbs) |
| Dimensions | 1668 x 462 x 100 mm (5.47 ft x 1.52 ft x 3.94 in) |
| Mounting | Floor mounted |
| Cloud integration | iD Cloud Loss Prevention (RFID modes) |
| Mains | 100 to 240 V |
| Upgrade path | RF to Hybrid to RFID in-field |
| Best for | Retailers planning RF-to-RFID migration |
Compatibility
RF mode uses standard 8.2 MHz RF labels (Checkpoint-interoperable at the label level). Hybrid and RFID modes use RAIN UHF source-tagged inventory with EPC. Because the i45 is the migration gate, the same hardware can be sourced through Nedap's certified Loss Prevention Partners as RF, Hybrid, or RFID. For a comparable RF/RFID upgradable pedestal available through RSG, see the Checkpoint Evolve iR P30.
Product codes: Nedap i45 (no public SKU; B2B-only via Loss Prevention Partners)